TRANSFORM YOUR HALLWAY - Simple DIY Wall Panelling

Moments in this video

1. 1:41–2:11 Install Vertical Battens From Board and Batten Wainscoting Installation, Step 3: Cut and Install Battens

   After installing the horizontal battens, begin placing the vertical battens. Measure the distance between the top and bottom horizontal battens for each vertical piece. Apply construction adhesive to the back of each vertical batten and secure it with the nail gun, ensuring even spacing for a consistent paneled look. Repeat this for all vertical battens on both sides of the hallway.

2. 4:10–4:47 Paint Paneling (Primer) From Board and Batten Wainscoting Installation, Step 6: Prime and Paint

   Pour paint primer/undercoat into a paint tray. Using a small roller for the flat surfaces and a paint brush for the edges and recessed areas, apply a thorough coat of paint primer to all paneled surfaces, including the base panels, battens, baseboards, and top trim. Allow proper drying time as per the product instructions before applying the final paint coats.

The guide that use this video

• Board and Batten Wainscoting Installation