Staining Banisters
Video by Jessica M · 1 moment used in Oak Valley Designs's DIY guides · 2:07 long
Moments in this video
- 0:11–0:35 Sanding the Banister
From Stair Banister Refinishing, Step 2: Lightly Sand the Surface
The first crucial step to staining is preparing the wood surface by sanding. Begin by using a coarser grit sandpaper for the initial pass to remove any existing finish or imperfections. The specific grit recommended can usually be found on the stain product's label. After the first round, switch to a higher grit sandpaper for a smoother finish, again following the manufacturer's advice on the stain packaging. Ensure all areas of the banister that are to be stained are thoroughly sanded.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.