Refinishing Furniture
Video by Today's Homeowner with Danny Lipford · 1 moment used in Oak Valley Designs's DIY guides · 1:13 long

Moments in this video
- 1:07–1:13 Apply Protective Finish Sealer
From How to Remove Carpet Stair Treads Without Damaging the Finish, Step 9: Apply Finish (Optional)
Once the wood stain is completely dry, apply several coats of a protective finish sealer, such as polyurethane, varnish, or lacquer. A foam brush is often ideal for applying an even, smooth coat. Apply thin, even coats, brushing in the direction of the wood grain. Allow each coat to dry thoroughly according to the product's instructions (usually 2-4 hours) before applying the next. Lightly sand between coats with a very fine-grit sandpaper (e.g., 320-400 grit) to achieve a super smooth finish and ensure good adhesion for subsequent coats. Wipe away any sanding dust with a tack cloth before applying the next layer. Aim for at least 2-3 coats for durable protection.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

