Laminate Staircase with white risers | DIY

Moments in this video

1. 13:39–14:45 Measure and Install Stair Nosing From How to Get a Hardwood Look on Carpeted Stairs, Step 8: Install Stair Nosing (if applicable)

   After all the laminate treads and melamine risers are installed, the final step for each step is to measure and install the stair nosing. Use a tape measure to get the exact length of the stair nosing for the current step. Mark this measurement onto the nosing material. Cut the nosing to length using a miter saw. Apply construction adhesive to the underside of the nosing and firmly press it into place at the front edge of the laminate tread. Secure the nosing with a finish nailer to hold it while the adhesive cures. Repeat this process for all remaining steps until the entire staircase is complete.

The guide that use this video

• How to Get a Hardwood Look on Carpeted Stairs