Installing a Wooden Loft Ladder and Hatch | The Carpenter's Daughter
Video by The Carpenter's Daughter - Vikkie Lee · 1 moment used in Oak Valley Designs's DIY guides · 8:36 long

Moments in this video
- 6:26–7:41 Adjust and Cut Ladder Length
From How to Trim Attic Ladder Legs to the Right Length, Step 2: Mark Cutting Lines on Ladder Legs
The ladder sections are typically longer than needed and designed to be cut to fit your ceiling height. Lower the folding ladder until it's angled towards the back wall. Measure the distance from the floor to where the ladder folds. This measurement will determine how much needs to be cut off the bottom ladder segments. Transfer this measurement to the side rails of the ladder, ensuring to draw a straight, perpendicular line for the cut. Unscrew the bottom ladder sections and take them to a suitable cutting area (e.g., outside on sawhorses). Carefully cut along the marked line using a handsaw. Re-screw the cut ladder sections back onto the main ladder, then check to see if the ladder now sits flat on the ground when fully extended. Make any further minor adjustments if necessary until it rests perfectly.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

