powered by

I Installed Craftsman Style Door Trim and… I Love It!

Video by The Life of the Zigs · 1 moment used in Oak Valley Designs's DIY guides · 10:15 long

Moments in this video

  1. 5:31–7:18 Fill Nail Holes and Caulk Seams From Board and Batten Wainscoting Installation, Step 5: Fill Nail Holes and Caulk Gaps

    After all trim pieces are securely fastened, inspect for any proud nails. Use a nail punch and hammer to set these nails just below the surface of the wood. Next, apply wood filler to all nail holes and any minor imperfections in the trim. The presenter uses DAP Plastic Wood, which changes color (pink to natural wood) as it dries, indicating when it's ready for sanding. Allow the wood filler to dry completely as per manufacturer instructions. Once dry, use a caulk gun with high-quality caulk (like DAP Alex Flex) to seal all seams and crevices where the trim meets the wall or other trim pieces. Pay attention to areas around hinges, either by removing them or carefully working around them. Also, caulk the very top edge of the trim to seal any drafts from the attic.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

I Installed Craftsman Style Door Trim and… I Love It! — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.