How to Clean Up Cat and Dog Pee from Carpet
Video by Clean That Up · 1 moment used in Oak Valley Designs's DIY guides · 4:06 long

Moments in this video
- 0:59–1:53 Extract and Rinse (Fresh Spot)
From How to Clean Up Pet Accidents on Carpet Stair Treads, Step 3: Blot and Rinse
Once the dwell time is complete, use a spotter machine (like the Hoover CleanSlate) to extract the cleaner and rinse the area. Fill the spotter machine with warm water only (no cleaning solution) and use it to suck up the enzyme cleaner from the carpet. Alternatively, if no machine is available, spray the spot with warm water from a spray bottle and dab dry with a clean white towel. Repeat this process until the spot is completely rinsed and no longer feels sticky.
The guide that use this video
Transcript
0:00 In this video, I'm going to show you how to clean up cat and dog pee from your carpet along with getting rid of the smell too. Now if it's a fresh spot that just happened and it's still wet, the first thing I always suggest is to immediately soak up or suck up as much of the liquid as possible. Now for pet spots like this, whether it's urine, feces or vomit, I always suggest to use an enzyme-based cleaner. Not only will they get the area cleaned, but they'll also remove those stinky odors too. Now this is the one here I suggest called War on Pea, I've used just about every enzyme cleaner on the market and this one by far does the best and it smells great too. When it's a fresh spot like this one here, I like to mix the cleaner in a spray bottle. For this, I'm using about three ounces of War on Pea and filling the rest with water
0:45 and then heavily spray the entire spot. Now the key with really any type of enzyme-based cleaner is you need to give it time to do its job. The War on Pea suggests about 20 to 30 minutes, so once you've sprayed it on, let it set and go to work. Once the cleaner has set on the carpet for the appropriate amount of time, the next step is to suck up and extract the spot. For this, I like to use a spotter machine or a carpet cleaning machine. Now I really like to suggest the Hoover Clean Slate, having two dogs, this little spotter machine has saved me multiple times, especially for some reason in the middle of the night and it just does an amazing job. Now if you don't have a spotter machine, that's okay too. You can also use just a spray bottle with warm water only and a few white towels. Spray the spot with the water bottle and use the white towel and apply pressure to extract
1:34 and suck up the spot. Continue that process of spraying and dabbing the spot with the towel until you feel it's completely rinsed. Now I will say, sometimes if the spot is really bad, you may have to repeat the cleaning process a few times to completely remove it. But at this point, it's very likely that your spot is cleaned up and smelling great. But what about a spot that is completely dry and has been there for some time? Now for this, I like to suggest that you saturate the area with the cleaner. So instead of spraying, I mix it up in a little container like this. For this spot, it wasn't super big, so what I did was mix up a cup of water with about a tablespoon of the war on pee and then poured it over the affected spot. Now again, after it's sat for about 20 to 30 minutes, I then come through with my extractor machine and flush the entire spot with water only.
2:23 Now another thing I like to mention about the war on pee cleaner and something I really like is that it's also an encapsulation product. And essentially what that means, just kind of a fancy way of saying it's not going to leave a residue in the carpet. And this is really important because if you do happen to leave a little cleaner behind when you're flushing and extracting, what can happen with other cleaners? Is it dry, sticky, attractor? And then you have another spot in the area you just cleaned. But what if you've already cleaned up the spots? You don't see them anymore, but your carpet still stinks. In most cases, this is caused because there is still pee in the carpet that needs to be cleaned up. I like to illustrate it this way. Let's say the spot on the surface was about the size of a tennis ball. Unfortunately, underneath the carpet and into the pad, it spreads out and becomes much
3:11 larger. So if you've only cleaned the surface, there's still urine on the pad and on the backing of the carpet that needs to be sucked out. Now the tool that I like to use for this is called a subsurface extractor or my nickname for it, the super sucker. You simply hook it up to a shop vac and it sucks all the way down to the pad, helping you remove that urine that you can't see. I use a similar process like I did for the old spot where I saturate the carpet with cleaner, let that sit, then come through with the super sucker, suck all that out, and then come through with some water, pour that over the spot, saturate the carpet again, and extract and suck that out to rinse. And there you have it. Now you know how to clean up a pet spot from your carpet. Now as always, if you do have any questions, definitely drop a comment down below and I
3:57 want to give a huge shout out to the Clean Squad Patreon members. Thank you so much for supporting the channel and allowing me to help you clean that up.
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

