Easily replace wood balusters with cast iron using TapNTwist
Video by Ed Rockwell · 1 moment used in Oak Valley Designs's DIY guides · 7:50 long

Moments in this video
- 6:38–7:50 Final Inspection and Cleanup
From Baluster Replacement, Step 6: Inspect and Finish
After all balusters are installed and tightened, take a moment to inspect the entire railing system. Ensure that each baluster is plumb, securely fastened, and that the decorative feet are properly positioned. Remove any remaining painter's tape and clean up any lingering debris. The final result should be a sturdy, aesthetically pleasing railing with a modern look.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

