DIY Stair Remodel on a Budget (Step-by-Step)

Moments in this video

1. 4:41–5:53 Cut and Install Nosings From How to Get a Hardwood Look on Carpeted Stairs, Step 8: Install Stair Nosing (if applicable)

   Now, measure the length of each stair near its front edge to determine the required length for each nosing. Cut the prepared nosing strips to these precise lengths using a miter saw (such as a DeWalt miter saw) or a circular saw. Next, apply a generous amount of wood glue to the back surface of the nosing strip. Position the nosing in place on the front of the newly installed plywood tread, ensuring it is at least flush with the top surface of the tread, or preferably slightly higher. This slight elevation allows for sanding it down later to achieve a perfectly flush finish. Secure the nosing permanently with a brad nailer. Crucially, immediately wipe off any excess wood glue that may squeeze out onto the wood surface, as dried glue will prevent stain from penetrating evenly, leading to blotchy results.

The guide that use this video

• How to Get a Hardwood Look on Carpeted Stairs