Dapin’ With A Feature Wall
Video by Royce Renovations · 1 moment used in Oak Valley Designs's DIY guides · 0:45 long
Moments in this video
- 0:05–0:13 Install Board and Batten Trim
From Board and Batten Wainscoting Installation, Step 4: Install Baseboard (if applicable)
Attach the pre-cut trim pieces to the wall following your design. The video shows a brief glimpse of a nail gun (specifically a Flex 23-gauge pin nailer) being used, which is a modern and efficient method for securing trim. Start by installing the horizontal boards, ensuring they are level, then add the vertical battens, maintaining consistent spacing. Use an adhesive caulk or construction adhesive on the back of the trim pieces for a stronger bond before nailing. The video showcases the walls with the board and batten already installed, highlighting the completed framing before the finishing touches.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.