Rinse with Clean Water

What happens in this clip

After applying the soapy water, take the other clean rag (or a different, clean section of the same rag if using one). Dip it into the bowl of plain warm water and wring it out thoroughly. Similar to the soapy application, press this clean, damp rag onto the area where you applied the soap. This helps to rinse out the soap and the lifted stain particles from the carpet. Repeat this rinsing process a couple of times to ensure all soap residue is removed.

Goal: Using a separate clean rag, dip it in plain warm water, wring it out, and press it onto the treated area to rinse the soap.

What's used

Materials

• Clean Warm Water
• Rag

About the full video

This video demonstrates a specialized method for spot cleaning carpet stair treads and landings. It involves using gentle pressing motions with soapy water and clean water, followed by blotting with a dry rag to effectively remove stains without damaging carpet fibers, ensuring a neat and safe finish.

Step 2 of 4: The Golden Rule: Spot-Clean Spills Immediately

Life happens, and spills are inevitable, especially in busy family homes! The secret to keeping your Oak Valley Designs treads pristine is prompt action. When a spill occurs, grab a clean, white cloth and gently blot the affected area immediately. Resist the urge to rub – this can actually spread the stain and push it deeper into the carpet fibers, making it harder to remove. Instead, apply a small amount of mild, pH-neutral detergent mixed with warm water to your cloth, then continue blotting. Remember, harsh chemicals and bleach are a big no-no; they can fade colors and compromise the integrity of our high-quality fibers. Once you’ve lifted the stain, let the spot air dry completely, ensuring your treads remain beautiful and ready for everyday life.

Open this step in the guide

Other videos for this step

• Apply Soapy Water to Stain
• Blot Dry and Repeat