Review Finished Project

What happens in this clip

Upon completing the installation of all carpet stair treads, take a moment to admire the transformed staircase. The video shows the finished look, demonstrating how the carpet treads have added warmth, safety, and a stylish element to the wooden stairs. Walk up and down the stairs to ensure all treads are securely in place and there are no loose edges. This final check confirms the success of the DIY project.

Goal: Confirm the successful installation and admire the aesthetic improvement.

Pro tips for this step

• Oak Valley Designs Pro Tip: Gently press down any edges that need extra adhesion, or allow more time for the adhesive to fully bond.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This DIY project demonstrates the straightforward process of installing carpet stair treads on a wooden staircase using pre-manufactured treads. The project aims to enhance safety, reduce noise, and improve the aesthetic appeal of stairs. The process involves unboxing the treads, preparing the staircase, carefully placing and aligning each tread, and securing them to achieve a professional and finished look.

Step 6 of 6: Complete Your Project & Enjoy Peace of Mind: Repeat and Test

You're nearly there! Continue installing the remaining carpet stair treads by repeating steps 4 and 5, gracefully working your way down the staircase one step at a time. Once all your beautiful, custom-made treads are in place, it's time for the final check: walk on your stairs! Pay attention to how wonderfully secure and comfortable they feel underfoot. This is the moment you truly appreciate the difference. If you happen to notice any edge that needs a little extra love, simply press it down firmly again. In some cases, allowing a bit more time for the adhesive to achieve its maximum bond strength can be beneficial. Remember, our non-damaging adhesive allows for careful repositioning or removal if needed, ensuring your beautiful hardwood surface remains protected. Congratulations on making your stairs safer, more stylish, and built for everyday life – especially for families with children or pets!

Open this step in the guide

Every video in how to install carpet stair treads to make hardwood stairs safe for dogs

1. Step 1: Prepare Your Stairs: Clean & Dry for a Perfect Bond

   • 0:08–0:10 Prepare the Stair Surface
   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase

2. Step 2: Align with Precision: Mark Your Center

   • 0:40–0:53 Measure and Mark First Tread Placement
   • 0:05–0:10 Measure and Position the First Tread
   • 0:00–0:11 Measure and Align First Stair Tread

3. Step 3: Preview Your Perfect Placement: Dry-Run First!

   • 0:10–0:13 Place the First Stair Tread
   • 0:10–0:18 Place and Secure First Tread
   • 0:17–0:21 Position and Adhere Treads

4. Step 4: Begin Your Transformation: Peel & Place from the Top

   • 0:06–0:13 Apply Self-Adhesive Treads
   • 0:53–1:01 Install the First Stair Tread
   • 0:10–0:13 Place the First Stair Tread

5. Step 5: Secure the Bond: Press from Center Outward

   • 0:10–0:13 Secure the First Tread
   • 0:17–0:21 Position and Adhere Treads
   • 0:10–0:18 Place and Secure First Tread

6. Step 6: Complete Your Project & Enjoy Peace of Mind: Repeat and Test

   • 0:21–0:32 Final Review and Enjoyment
   • 0:13–0:17 Complete Installation and Final Inspection
   • 0:24–0:29 Review Finished Project (this video)