Reinstall Metal Railing

What happens in this clip

With the new treads installed, position the metal railing back into its original location. Use a drill to create new pilot holes through the railing's mounting plates and into the new wooden treads. Reinstall the original bolts and secure the railing firmly in place using a wrench or socket set, ensuring it is stable and safe.

Goal: Drill new pilot holes into the newly installed treads and reattach the metal railing using the original hardware.

What's used

Tools

• Craftsman Cordless Drill
• Drill Bit Set
• Wrench Set / Socket Wrench

About the full video

This project guides you through renovating carpeted stairs into a modern look with stained wooden treads and painted white risers. It covers removing old carpet, preparing the existing structure, cutting and staining new wood treads, installing them, and reinstalling the railing for a complete transformation.

Step 8 of 9: Reassemble Staircase Components

Carefully reattach all treads, balusters, and railing sections to the central pole and to each other. Ensure all connections are secure and that the staircase is stable. Tighten any bolts or screws as needed.

Open this step in the guide

Every video in How to Update a Spiral Staircase

1. Step 1: Assess Existing Staircase Condition

   • 1:02–1:35 Visually Inspect for Staircase Wear and Damage
   • 0:00–0:53 Assess Damage & Prepare for Repair
   • 0:15–0:30 Initial Inspection and Hazard Identification

2. Step 2: Clean and Degrease Components

   • 2:29–3:41 Prep Day: Cleaning and Sanding
   • 1:52–2:08 Scrape Loose Paint Flakes
   • 0:34–0:40 Mechanically Remove Loose Rust and Flaking Material

3. Step 3: Prepare Metal Surfaces for Finishing

   • 0:37–0:41 Sand the Staircase
   • 0:07–1:27 Sand and Prime the Staircase
   • 0:32–1:08 Clean, Sand, and Tape the Staircase

4. Step 4: Prepare Wood Treads for Finishing

   • 0:20–0:25 Sand and Finish Treads
   • 0:21–1:25 Prepare Treads (Sanding and Cleaning)
   • 2:06–2:52 Sand Stair Treads and Risers

5. Step 5: Apply Primer to Metal Components

   • 0:20–0:23 Apply Rust-Inhibiting Primer
   • 2:51–3:32 Apply Oil-Based Primer
   • 0:32–1:06 Apply Rust-Inhibiting Primer

6. Step 6: Apply Finish to Metal Components

   • 3:22–4:09 Paint Metal Frame (Top Coat)
   • 0:14–0:28 Apply Oil-Based Enamel Topcoat to Iron
   • 2:25–2:48 Apply Top Coat Paint

7. Step 7: Apply Finish to Wood Treads

   • 4:29–5:04 Stain New Stair Treads
   • 3:22–3:28 Stain & Seal Stair Treads
   • 3:41–4:00 Seal Stained Treads

8. Step 8: Reassemble Staircase Components

   • 0:47–0:50 Reinstall Metal Railing (this video)
   • 0:22–0:31 Secure All Treads and Joints
   • 13:30–15:00 Install Stair Treads with Mechanical Fasteners

9. Step 9: Final Inspection and Touch-ups

   • 1:08–1:37 Final Assembly and Inspection