Position and Adhere Treads

What happens in this clip

Once the adhesive is exposed, the carpet stair tread is carefully positioned onto a stair. A tape measure is then used to quickly double-check the placement, likely for centering or consistent spacing from the edge. After confirming the position, the tread is pressed down firmly with hands to ensure secure adhesion and smoothed out to remove any air bubbles or wrinkles. This process is repeated for all stairs.

Goal: Securely attach stair treads to each step.

What's used

Tools

• Tape Measure
• Yardstick

Materials

• Oak Valley Designs Carpet Stair Tread Oak Valley Designs

About the full video

This project demonstrates how to quickly and easily install self-adhesive carpet stair treads on outdoor stairs. The primary motivation is to provide a safer, less slippery surface for an aging dog, but it also enhances the aesthetic appeal of the stairs. The process involves simply peeling the backing and pressing the treads into place, requiring no power tools and minimal time.

Step 2 of 2: Secure and Align: Pressing Your Tread into Place

Now for the satisfying part! With the liner removed, carefully position your Oak Valley Designs carpet stair tread onto your chosen step or landing area. Take a moment to align it precisely with your desired placement – this attention to detail ensures a beautiful, professional finish. Then, apply firm, even pressure across the entire surface of the tread. This vital action allows our pressure-sensitive adhesive to make full contact and bond securely, providing a safe and stylish upgrade to your stairs. No nails, no glue, no stress – just a secure, elegant fit!

Open this step in the guide

Other videos for this step

• Secure the First Tread
• Place and Secure First Tread