Measure Total Rise
From How to Calculate How Many Stairs You Need · Step 1 of 7 · Video by stairbuilding

Showing 0:17–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
Measure the vertical distance from the top surface of your finished deck floor straight down to the level where the stairs will terminate. This measurement is known as the 'total rise'. For the example in the video, the total rise is 60 inches.
Goal: The first step in stair stringer layout is to accurately measure the total vertical distance from the top of the finished deck floor to the ground where the stairs will land.
What's used
Tools
- Tape Measure
About the full video
This video provides step-by-step instructions for accurately laying out deck stair stringers by calculating the total rise, determining the number of risers and treads, and then calculating the total run to find the precise landing point for the stairs. This method helps avoid common mistakes in stair construction.
Step 1 of 7: Measure the Total Rise
Using a tape measure, determine the total vertical distance that the stairs need to cover. This is the 'total rise'. Ensure the measurement is taken from the finished surface of the lower floor to the finished surface of the upper floor. For accuracy, use a level if needed to ensure a true vertical measurement.
Every video in How to Calculate How Many Stairs You Need
Step 1: Measure the Total Rise
- 0:15–0:29 Measure Total Rise
- 0:01–0:28 Measure Total Vertical Rise
- 0:17–0:31 Measure Total Rise (this video)
Step 2: Determine the Ideal Riser Height
Step 3: Calculate the Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 8:59–9:54 Calculate Number of Risers and Treads
- 7:42–8:55 Calculate Number of Risers
Step 4: Recalculate Actual Riser Height
Step 5: Calculate the Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 0:54–1:13 Determine Number of Treads
- 8:59–9:54 Calculate Number of Risers and Treads
Step 6: Determine the Total Run
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 6:51–8:30 Calculate Total Run
Step 7: Calculate Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 9:54–10:28 Determine Tread Run and Total Run
- 8:50–10:30 Calculate Risers, Treads, and Total Run
How to Calculate How Many Stairs You Need
This project outlines the process for calculating the number of stairs needed for a given rise, ensuring safety and code compliance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

