Measure Bullnose Edge Width

What happens in this clip

The most critical first step is to accurately measure the width of the bullnose edge of the stair landing. This measurement should correspond precisely to the width of the carpet stair tread installed on the step immediately below the landing. For example, if the stair tread is 35 inches wide, the landing carpet's edge should also be 35 inches wide to maintain visual continuity. Measure from the far left side to the far right side of the bullnose edge.

Goal: Begin by measuring the width of the bullnose edge of the landing, ensuring it matches the width of the carpet stair tread directly below it for a consistent look.

What's used

Tools

• Tape Measure

Pro tips for this step

• Oak Valley Designs Pro Tip: Measure any angled or turning landing sections individually, carefully noting each corner and curve for a precise fit.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This video details the specialized method of accurately measuring a stair landing for carpet installation. It involves using painter's tape to define the carpet's perimeter, ensuring precise cuts and a neat finish that aligns with existing stair treads and accounts for architectural features like posts.

Step 1 of 3: Step 1: Precise Measurement for Your Landing

It's crucial to remember that your landing isn't a typical stair tread; it's a distinct, flat piece of carpet designed to create a seamless transition and bring warmth and elegance to your home. For a perfect, custom-made fit, meticulously measure its complete width and length as a single, rectangular platform. If your landing features turns or angles, we recommend thoughtfully dividing it into smaller, manageable sections. Measure each section individually, paying close attention to every corner and curve to capture all dimensions precisely. This meticulous approach ensures your custom landing piece will fit beautifully and safely. For peace of mind and optimal functionality, confirm that your measured landing width is at least as wide as your stairway and that its depth in the direction of travel is a minimum of 36 inches. And, of course, for a stable and secure installation, ensure your landing surface is perfectly level.

Open this step in the guide

Every video in how to install a carpet landing at the top of your stairs

1. Step 1: Step 1: Precise Measurement for Your Landing

   • 1:10–1:26 Measure and Customize Tape Outline
   • 0:07–0:30 Measure Bullnose Edge Width (this video)
   • 0:30–0:48 Define Initial Perimeter with Tape

2. Step 2: Step 2: Measuring Your Individual Stair Treads for a Perfect Fit

   • 0:54–1:39 Measure Stair Tread Depth
   • 0:21–0:53 Measure Stair Tread Width
   • 0:00–0:02 Prepare Stairs and Measure

3. Step 3: Step 3: Placing Your Order for Custom-Made Carpet Pieces

   • 1:10–1:26 Measure and Customize Tape Outline
   • 0:07–0:30 Measure Bullnose Edge Width
   • 0:30–0:48 Define Initial Perimeter with Tape