Measure and Mark Tread and Nosing

What happens in this clip

With the riser confirmed, proceed to measure the stair tread. Use the stair tread templating tool to get precise measurements. When marking the flooring, remember that the stair nosing will line up with the front edge of the tread. Position the nosing and the flooring piece together as they will be installed and trace the template onto both simultaneously. This ensures the angles and length match perfectly across both components. Remember that each side of the stair tread may have a different angle.

Goal: Obtain accurate measurements for both the stair tread and matching nosing.

What's used

Tools

• Marker
• Scribe
• Stair Tread Templating Tool Unbranded
• Measuring tape and angle finder

Materials

• Engineered Hardwood Flooring Florette Silverline (Anzo color)
• Stair Nosing Florette (Anzo color)

About the full video

This DIY project provides a step-by-step guide to installing engineered hardwood flooring and matching stair nosing on existing stairs. The process involves precise measurement and cutting of flooring pieces, removal of unnecessary grooves, dry fitting for accuracy, and finally, gluing down the risers, treads, and nosing, securing them with brad nails and finishing with a wax crayon.

Step 4 of 4: Record Measurements

Create a clear record of all measurements taken for each stair tread. This typically involves noting down the tread number, the tread depth, and the nosing overhang for each step. It is advisable to also record the total tread depth. This documentation is vital for ordering new treads or for ensuring uniformity during a renovation.

Open this step in the guide

Every video in How to Measure Stair Tread Depth and Nosing Overhang

1. Step 1: Measure Stair Tread Depth

   • 0:54–1:39 Measure Stair Tread Depth
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:24–0:56 Understanding Tread Depth and Nosing

2. Step 2: Measure Nosing Overhang

   • 0:55–1:13 Measure and Mark Tread and Nosing
   • 5:03–6:09 Determine Tread Overhang and Length
   • 0:28–1:15 Measure and Mark Nosing Length

3. Step 3: Measure Total Tread Depth (Including Nosing)

   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:54–1:39 Measure Stair Tread Depth
   • 0:31–1:01 Measure Riser Height and Tread Depth Consistency

4. Step 4: Record Measurements

   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:31–1:01 Measure Riser Height and Tread Depth Consistency
   • 0:55–1:13 Measure and Mark Tread and Nosing (this video)