Install the First Stair Tread

What happens in this clip

Carefully peel off the protective backing from the adhesive side of the first stair tread. Align the tread precisely with the marks or template created in the previous step. Once aligned, firmly press the tread onto the stair surface, starting from one edge and working your way across, to ensure the adhesive makes full contact and eliminate any air bubbles.

Goal: Securely attach the first stair tread to the cleaned and marked stair.

What's used

Materials

• Stair Tread Oak Fairy Designs

About the full video

This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.

Step 3 of 4: Install Your Chosen Solution with Care

This is where your DIY efforts truly shine! For grip tape or carpet treads, begin by carefully cutting each piece to perfectly fit your stair. With our DIY-friendly solutions, you can simply peel off the backing and firmly press the material onto the stair. Always work from the center outwards, smoothing away any air bubbles to ensure complete and secure adhesion. Pay special attention to firmly sealing all edges for a professional-looking result. If you're using an abrasive grit coating or paint, apply it evenly following the manufacturer’s instructions, typically by rolling it on. Allow ample time for it to cure completely before stepping on it, ensuring lasting safety.

Open this step in the guide

Other videos for this step

• Apply Stair Treads
• Secure the First Tread