Install and Wire Motion Sensors

What happens in this clip

The system includes two motion sensors. Three types are available: flush-mounted (comes with a back box; install the back box with screws, then clip the sensor in), surface-mounted (small and light; attach using double-sided adhesive tape or glue), and baluster-mounted (designed to fit within a baluster; insert into a correctly sized recess and secure with adhesive tape, glue, or another preferred method). Position one motion sensor at the top of the stairs and the other at the bottom, ensuring that anyone entering the staircase will cross the sensor's detection beam. Each motion sensor is supplied with a 3-core cable, typically colored red, black, and green. For each sensor, insert each core wire into the corresponding color-coded terminal on the control unit. Pay close attention to which terminals are designated for the top sensor ('Góra') and which for the bottom sensor ('Dół'). Tighten the terminal screws firmly to ensure a secure connection for all wires.

Goal: Connect motion sensors to the control unit

What's used

Tools

• 3-Core Cable (Red
• Black
• Green)
• Back Box Stellar Lighting
• Control Unit SCR2 Soled
• Double-sided Adhesive Tape
• Motion Sensors Stellar Lighting
• Screwdriver
• Screws

About the full video

This project guides you through installing an intelligent stair lighting system from Stellar Lighting. The system features LED strip lights integrated into aluminum profiles, motion sensors at the top and bottom of the staircase for hands-free illumination, a control unit (Soled SCR2) for managing light effects and settings, and a power supply. The lights create a sweeping effect when triggered, enhancing both safety and aesthetics. The instructions cover assembling the light strips and profiles, wiring them to the control unit, installing motion sensors, connecting to the power supply, and adjusting system settings.

Step 5 of 6: Mount Motion Sensor and Power Supply

Choose a location for the motion sensor that has a clear line of sight to the stairs and will effectively detect movement. Mount it using its adhesive backing or screws, ensuring it's firmly in place. Mount the power supply near an electrical outlet, again using adhesive or screws. Ensure that all wiring is neatly routed and secured using cable clips or ties to prevent it from hanging loosely or becoming a hazard.

Open this step in the guide

Every video in How to Install Motion-Sensor LED Strip Lights on Stair Treads

1. Step 1: Plan LED Strip Placement

   • 0:00–0:02 Plan and Gather Components
   • 0:00–0:19 Install Flexible LED Strip Lighting
   • 5:35–6:58 Plan Light Placement and Spacing

2. Step 2: Prepare Stair Treads

   • 0:00–0:01 Prepare Staircase for LED Installation
   • 0:10–0:12 Install LED Strips on Stair Treads
   • 0:02 Prepare Stair Surface

3. Step 3: Install LED Strips

   • 0:10–0:12 Install LED Strips on Stair Treads
   • 0:01–0:04 Apply LED Strip Lights to Treads
   • 0:00–0:19 Install Flexible LED Strip Lighting

4. Step 4: Connect LED Strips and Motion Sensor

   • 0:09–0:09 Connect Controller, Sensors, and Power Supply
   • 0:41–0:45 Connect LED Strips to Motion Detector
   • 1:22–1:36 Connect Interconnect Cable to LED Strip/Panel

5. Step 5: Mount Motion Sensor and Power Supply

   • 13:17–14:27 Mount Motion Sensors and Electronic Box
   • 3:50–4:30 Mount and Test the Motion Sensor
   • 3:25–4:32 Install and Wire Motion Sensors (this video)

6. Step 6: Test the System

   • 0:02–0:14 Test Motion Sensor Functionality
   • 0:10–0:11 Test Functionality and Observe Results
   • 0:07–0:10 Test Electrical Components