Curing and Final Reveal

What happens in this clip

With all risers, treads, and nosings installed and securely taped, allow the construction adhesive to cure completely. The presenter notes that for practical reasons in a lived-in home, the installation might be done over a couple of days (e.g., alternating steps) to maintain access to the stairs. Once cured, carefully remove all masking tape. The video concludes with a showcase of the finished LVP staircase, highlighting the clean lines and updated aesthetic.

Goal: After all LVP components are installed and taped, allow adequate curing time for the adhesive. The final step is to remove all masking tape and reveal the completed, stylish LVP staircase.

About the full video

This video provides a detailed guide on installing Luxury Vinyl Plank (LVP) flooring on a set of stairs. It covers preparation steps like removing old carpeting, addressing squeaks, and preparing the nosings. The process includes using a specialized stair jig for accurate measurements and cuts, removing integrated foam underpads from LVP planks for adhesive bonding, and then installing the risers, treads, and custom nosings using construction adhesive and masking tape for secure setting.

Step 8 of 8: Allow Adhesive to Cure

Refer to the adhesive manufacturer's instructions for the recommended curing time. This can range from a few hours to 24-48 hours. Avoid walking on the stairs or placing heavy objects on the treads during this period to ensure the adhesive bonds properly and the treads remain securely in place.

Open this step in the guide

Every video in How to Choose and Install Wool vs Synthetic Carpet Treads

1. Step 1: Choose Carpet Tread Material

   • 4:26–5:07 Understand Wool Rug Properties
   • 0:37–0:54 Overview of Rug Materials
   • 7:51–8:45 Choosing Rugs for Specific Rooms

2. Step 2: Measure Staircase Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:18–0:49 Measure Stair Tread and Riser

3. Step 3: Purchase Carpet Treads

   • 0:02–0:04 Acquire and Prepare Carpet Treads

4. Step 4: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs
   • 0:59–2:07 Install First Stair Tread

6. Step 6: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Trim Excess Material

   • 0:09–0:56 Trim Excess Carpet and Complete Installation
   • 0:16–0:25 Trim Excess Carpet Along Edge
   • 3:59–4:29 Final Trimming and Inspection

8. Step 8: Allow Adhesive to Cure

   • 27:37–29:21 Curing and Final Reveal (this video)
   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps