Calculate Final Total Rise
From How to Measure Stair Rise and Run · Step 1 of 6 · Video by stairbuilding

Showing 0:54–1:25 of the source video. Watch the full video with every moment.
What happens in this clip
Once the true level horizontal line is established (as described in the previous step), measure the vertical distance from this level line down to the actual finished surface of the lower landing or ground where the stairs will terminate. Compare this measurement to what a direct measurement might have been. If there's a difference between the level line's height at the lower termination point and the actual lower landing height, subtract or add that difference to ensure your total rise measurement is precise. For example, if the lower landing is 2 inches lower than the level line's projection, add 2 inches to the initial vertical measurement from the level line to the upper landing. This correctly adjusted total rise is then used to calculate the individual riser and tread dimensions needed for accurate stair stringer layout and eventual cutting.
Goal: Measure vertically from the established level line down to the lower landing and adjust the initial measurement by subtracting or adding the difference to obtain the accurate total rise.
What's used
Tools
- Measuring Tape
About the full video
This video demonstrates a crucial preliminary step for stair stringer installation: accurately measuring the total vertical rise between two levels. It highlights common pitfalls of incorrect measurement due to uneven ground or landings and provides a method to establish a true level line for precise calculations before any cutting is done. Note: This video focuses solely on the measurement aspect and does not include instructions on cutting stair stringers with a circular saw or any other tool.
What's said in this clip
a nice level line on the wall that you can measure from. That way if the landing is too high you're going to know about it and be able to make the adjustments or if it's lower you're going to be able to make the adjustments and you can simply make the adjustments by measuring from either the top or the bottom of a straight edge like a 2 by 4 and then subtract or add the difference to this measurement here to get the overall total rise. You need to calculate the individual risers so that you can lay out your stringer correctly. And thanks for watching.
Automatically transcribed from the source video.
Step 1 of 6: Determine Total Rise
Place a long level or a straight edge on the finished floor of the lower level, extending it to the edge of the upper level's finished floor. Measure the vertical distance from the lower finished floor to the point where the level/straight edge meets the upper finished floor. This measurement is the total rise of the staircase.
Every video in How to Measure Stair Rise and Run
Step 1: Determine Total Rise
- 0:04–0:30 Measure Total Rise
- 2:54–4:34 Determine the Total Rise
- 0:54–1:25 Calculate Final Total Rise (this video)
Step 2: Calculate Ideal Riser Height
- 0:29–1:07 Calculate Rise and Run
- 4:32–5:10 Calculate Individual Riser Height
- 0:28–1:03 Calculate Approximate Number of Risers
Step 3: Determine Actual Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:28–1:03 Calculate Approximate Number of Risers
Step 4: Determine Number of Treads (Steps)
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 8:59–9:54 Calculate Number of Risers and Treads
Step 5: Measure Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 1:13–1:29 Calculate Total Run
- 9:54–10:28 Determine Tread Run and Total Run
Step 6: Calculate Actual Tread Run
- 0:29–1:07 Calculate Rise and Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
How to Measure Stair Rise and Run
This project outlines the process for accurately measuring the rise and run of stairs, a critical step in stair construction, renovation, or repair.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

