powered by

Apply Fabric Softener Solution

From How to Remove Pet Hair from Carpeted Stairs and Treads · Step 3 of 5 · Video by Pan The Organizer

Showing 2:37–3:27 of the source video. Watch the full video with every moment.

What happens in this clip

For instances where pet hair remains deeply embedded or is particularly stubborn, prepare a diluted fabric softener solution. The recommended dilution ratio is one part fabric softener to seven parts water (1:7). Pour this mixture into a clean spray bottle, such as the Chemical Guys branded bottle shown in the video. Liberally spray the affected areas of the carpet or upholstery, ensuring the fabric becomes damp but not oversaturated. Allow the solution to dwell on the surface for approximately two minutes. This action serves two primary purposes: it effectively neutralizes the static electricity that often causes pet hair to cling tightly to fabric fibers, and it helps to relax and loosen the individual hair strands, making them significantly easier to extract in the subsequent steps.

Goal: Prepare and apply a diluted fabric softener solution to exceptionally stubborn pet hair areas to neutralize static and further loosen embedded hairs.

What's used

Tools

  • Spray Bottle

Materials

  • Fabric Softener
  • Water

About the full video

This video details a multi-step process for effectively removing stubborn pet hair from automotive interior surfaces like carpets and upholstery. The method involves initial vacuuming, agitation with specialized pet hair removal brushes, and the application of a diluted fabric softener solution to loosen embedded hairs, followed by re-brushing and final vacuuming for thorough cleaning. While the prompt mentioned the wet towel method, this video demonstrates alternative and often more effective techniques for deep pet hair extraction.

What's said in this clip

well, the little piece of cloth is to use a solution like this one in a spray bottle. It's a solution that contains a drop of water and also additional adhesive. So, yes, the same additional adhesive you used for your clothes. So, you make a solution, one in seven, or one part of a drop of water for seven parts. You put the mixture in the spray bottle, then you vaporize generously on the surface to be treated. You let the product last about two minutes. It will help, therefore, to make the hair more loose, first, in eliminating the static change, which exists between the hair and the fibres, the hair on the top or on the top or on the top. And it will be easier, therefore, to remove the hair from your hair, and the hair on the top, etc. And so, once the two minutes have passed with the product,

Automatically transcribed from the source video.

Step 3 of 5: Fabric Softener Spray Treatment

In a spray bottle, mix one part liquid fabric softener with three parts water. Lightly mist the carpeted stairs and treads with this solution. Allow it to sit for a few minutes to help break down the static cling that holds pet hair to the fibers. Avoid over-saturating the carpet.

Open this step in the guide

Every video in How to Remove Pet Hair from Carpeted Stairs and Treads

  1. Step 1: Initial Vacuuming

  2. Step 2: Rubber Glove or Squeegee Method

  3. Step 3: Fabric Softener Spray Treatment

  4. Step 4: Post-Treatment Grooming

  5. Step 5: Final Vacuuming and Cleaning

How to Remove Pet Hair from Carpeted Stairs and Treads

This project outlines a multi-step approach to effectively remove pet hair from carpeted stairs and treads, utilizing various tools and techniques for a thorough cleaning.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Apply Fabric Softener Solution — How to Remove Pet Hair from Carpeted Stairs and Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.